Rivera-primo Mid-Controls Manuel d'utilisateur télécharger pdf (Page 8)

. Remove block-off cap from outer belt guard. (Photo 10A & 10B)

f your outer belt guard does not have a block-off cap

you will have to finish machining the shifter crossover

tube hole. (Photo 10C)

9. Install the outer belt guard per BRUTE IV EXTREME

instructions.

10. Install thrust washer (P/N 1101-0022) over shifter shaft.

(Photo 11)

11. Install shifter yoke onto shifter shaft aligning the

three(3) each dowel pins on the shaft to the yoke

using one(1) each 5/16-18 x 1.00” socket head cap

screw to pull the yoke onto the shifter shaft and torque.

(Photo 12)

12. Install footpeg and shifter peg.

13. Reinstall the battery.

hoto 10A

Photo 10B

Photo 10C

Photo 11

Photo 12

1101-0022

Shifter Lever Assy

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Rivera-primo Mid-Controls Manuel d'utilisateur Page 8